How To Use The Wunderbar With A Pressurised 5ltr Heineken Keg
Available from all good supermarkets, the 5ltr pressurised Heineken keg is the easiest method of getting chilled beer from your Wunderbar.
We at Barmans Ltd recommend this method, as when you use the Wunderbar with the pressurised Heineken keg you do not need any of the other pressurising systems, making the process quicker.
Please Note: A pressurised keg has a recommended usage time of approximately 30 days after first use.
THINGS YOU WILL NEED:
• The keg
• The keg tap supplied with the keg
• Tap Hose
Please Note: None of the supplied Wunderbar adpaters are required with the Heineken keg.
STEP 1:
Remove the long spout from the keg tap (this is not needed with the Wunderbar) and replace it with the tap hose.
STEP 2:
Place the full keg in the Wunderbar.
Feed the tap hose through the Wunderbar tap with the lever in the open/down position.
When the locking block is in place release the lever into the closed/up position.
Please Note: If you are using the Wunderbar Univat keg, make sure to fill it before you attach the adapter.
STEP 3:
Place the keg in the Wunderbar and simply press the keg tap (with tap hose attached) onto the keg to pierce the keg.
Push the keg handle into the on position.
Please Note: Remember this variety of keg is already pressurised, so be ready for some spray during the piercing of the keg.
STEP 4:
Set the air ON/OFF switch to 'OFF' and shut the lid of the Wunderbar.
THE WUNDERBAR IS READY TO USE:
Just place a glass under the tap and pull the lever down to dispense the drink!
To return to the Wunderbar details page, and to purchase, click here...